Tel: +27 (0)11 792 6644 | |
3 Ruco Close, Bushhill Office Park, Bromhof, 2154


Lynx Optics > Products > Riflescopes > Lynx LX 2-7x32

Lynx LX 2-7x32


Compact 2-7x32mm with good optics and sensible magnification range make this model a good an inexpensive choice for bushveld hunting and mounting onto small or compact rifles (7x brings a 200 metre target to an apparent 29 metres).

The standard off-the-shelf model is fitted with a duplex reticle and variety of reticles options are available to be fitted in-house pre- or post-purchase, at a reasonable charge. Reticles options specific to this scope are detailed under the options tab below.

  • 1" one-piece main tube
  • Scratch resistant matte black anodized finish
  • Nitrogen filled and waterproof to one metre for 60 minutes
  • Fully Multicoated lenses. All internal and external lens surfaces are multi coated and produce a bright, colour true contrasty image
  • Recoil proof to 1000 gravities; 25% more recoil energy than an average .375
Power 2x ~ 7x Click value 1/4moa
Objective diameter 32mm Tube diameter 25.4mm
Field of view in degrees 85º ~ 28º Length 279mm
Eye relief 92 ~ 85mm Weight 300g
Graticule (std) / options Plex Available Finishes Matte Black

Reticle options

Duplex MIL DOT Hold Over 2 
Duplex Reticle mil dot reticle
hold over 2 reticle
The Duplex or Plex reticle gives the hunter basic range-finding capability by representing 10 MOA at 100 metres across the thin centre section of the crosshair with the scope magnification set to 7. Mil dot spacings are available in 10x, 12, 16x and 24x sizes, depending on the scope model. Can be fitted to any LX and most LX2 riflescopes. Nine hold-over aiming points below the centre cross provide an accurate means of compensating for bullet drop over 100 to 400 metres without touching the scope. The diamond-shaped aiming points are small and unobtrusive, presenting an uncluttered sight-picture that does not confuse the eye.
  Instruction - Lynx mil dot reticle LX&LX2.pdf  Instructions - Hold-over reticle 2.pdf
Fine Cross Hair Fine Cross with Dot MIL Step
D-ret-cross.jpg E-ret-x-dot.jpg mil step reticle
Can be fitted to most Lynx riflescopes. Best suited to target shooters who require very fine aiming reference. 

Not suitable for hunting.
Can be fitted to most Lynx riflescopes. Best suited to target shooters who require very fine aiming reference. The dot is 1/4 MOA with the scope set to 24x

Not suitable for hunting.

Can be fitted to any LX or LX2 model riflescope. Reticle style that satisfies the needs of both hunters and target shooters in addition to presenting the shooter with a clean and accurate range-finding sight-picture. Reticle lines step down in thickness at 1 MIL increments at 24x.

Detail view of the Mil Step reticle: The grey markings illustrate the four 24x MIL-graduated steps.

    Instructions for Lynx mil step reticle.pdf


There are currently no accessories for this item.


There are currently no downloads for this item.


Other Riflescopes

View All Riflescopes

pl-lynx.jpgpl-igen.jpgpl-kowa.jpgpl-lightforce.jpgpl-nightowl.jpgpl-ranger.jpgpl-acorn.jpgpl-warne.jpgBrands We Sell | Peterson Match Grade Brass Logo Colour | Lynx Optics South Africa | Hunting Camping in South Africa


Latest News


Lynx LX3 riflescope test report by Koos Barnard | SA Jagter June 2017

Read More
Tags :

Where to Buy?

Find a store near you

Lynx Web Map Banner | Hunting Gear South Africa | Hunt Accessories | Sports Optics