Tel: +27 (0)11 792 6644 | |
3 Ruco Close, Bushhill Office Park, Bromhof, 2154


Lynx Optics > Products > Riflescopes > Lynx LX2 3.5-10x50

Lynx LX2 3.5-10x50


If you’re looking for a scope with more light gathering power the new LX2 3.5-10x50 is for you.

56% brighter than a 40mm objective lens scope. LX2 crystal clear optics and variable magnification from 3.5X to 10X makes this scope ideally suited to hunting in the bush from 35 metres and open plain hunting up to about 400 metres, well into the twilight hours.

  • One-piece maintube for added strength and recoil resistance.
  • Improved waterproofing. 
  • Fully Multicoated.  All lens surfaces are mutlicoated to provide sharper and brighter images.  Better contrast, less glare / flare.
  • 1/4 MOA windage / elevation controls with tool-less zero


  Low Power High Power
Actual magnification 3.5 10
Exit pupil diameter (mm) 14 5
Eye relief (mm) 90mm 87mm
Actual field of view 57°
Objective diameter 50mm
Total windage adjustment range 50MOA
Total elevation adjustment range 50MOA 
Tube diameter 25.4mm
Waterproof Positive internal pressure 300KPa. Submersible 1m for 60 minutes.
Recoil proof 1000G (.375 approximate equivalent + 25%)
Fog proof Purged with dry nitrogen
Temperature operating range -20 to +71°C
Reticle Glass etched or metal, depending on the model. 2nd focal plane.
Parallax 100m fixed
Eyepiece Lockable slow focus
Lens coating Fully multi coated. Light transmission 99.7% per lens surface
Windage / elevation controls Finger adjustable hunting controls with tool free zero
Windage / elevation click value 0.25 MOA
Length 328mm
Weight 487g
Country of manufacture Japan


Reticle Options g model (glass etched reticle)
SA Hunter (SAH) Range Finding (RF)
Lynx SA Hunter Reticle Lynx RF Reticle
Instructions download Instructions download
Lynx SA Hunters reticle gives hunters the means to hit their target up to 300 metres away, dead-on first shot. Measure the distance to a target of known height simply and accurately. The centre floating dot provides a precise aiming reference and 0.5 MOA hold over aiming points are provided on the bottom vertical of the reticle. Set at 5x and use as a standard mil reticle.


Reticle options standard model (metal reticle)
Duplex Mil dot Mil Step Hold over 2
 Duplex Reticle mil dot reticle mil step reticle hold over 2 reticle
Instructions download Instructions download Instructions download Instructions download
Standard duplex reticle pattern has heavy outer bars and a thin cross in the centre. Gives the hunter elementary range-finding capability by representing 15 or 30 MOA at 4x magnification across the thin centre section. Heavy outer bars with a thin cross in the centre. Circular mil dots spaced evenly 1 mil apart on the thin lines provide an accurate range determination method used by military and law enforcement globally. Reticle style that satisfies the needs of both hunters and target shooters in addition to presenting the shooter with a clean and accurate range-finding sight-picture.  Reticle lines step down in thickness at 1 MIL increments at 24x. Nine hold-over aiming points below the centre cross provide an accurate means of compensating for bullet drop over 100 to 400 metres without touching the scope. The diamond-shaped aiming points are small and unobtrusive, presenting an uncluttered sight-picture that does not confuse the eye.

Dust caps for rifle scopes  
Protective lens covers  

Strelok ballistic calculator download links:

For Android

Strelok Plus for Android

Strelok Pro for Android

For iOS 

iStrelok for iOS

iStrelok Pro for iOS


Other Riflescopes

View All Riflescopes

pl-lynx.jpgpl-igen.jpgpl-kowa.jpgpl-lightforce.jpgpl-nightowl.jpgpl-ranger.jpgpl-acorn.jpgpl-warne.jpgBrands We Sell | Peterson Match Grade Brass Logo Colour | Lynx Optics South Africa | Hunting Camping in South Africa


Latest News


Lynx LX3 riflescope test report by Koos Barnard | SA Jagter June 2017

Read More
Tags :

Where to Buy?

Find a store near you

Lynx Web Map Banner | Hunting Gear South Africa | Hunt Accessories | Sports Optics